Godex International Co. Ltd. 6PDL7 Manual De Usuario
5-5. Print Head Balance and Pressure Adjustment
1.
Open the top cover.
2.
Pull the Print Head Lever out
and flip it upward to the right.
and flip it upward to the right.
1
2
When printing with different label
materials or using different ribbon
types, unbalanced print quality may
occur due to the media material
differences. Moreover, when one
side of the printout is not printed
clearly or ribbon wrinkle occurs, it’s
necessary to adjust the position or
pressure of TPH Spring Box.
3.
materials or using different ribbon
types, unbalanced print quality may
occur due to the media material
differences. Moreover, when one
side of the printout is not printed
clearly or ribbon wrinkle occurs, it’s
necessary to adjust the position or
pressure of TPH Spring Box.
3.
Move the TPH Spring Box as
showed on the figure to
change the print position.
Normally, the wider the paper,
the right-TPH Spring Box is
farther to the right (out); the
narrower the paper, the
right-TPH Spring Box is farther
to the left (in).
showed on the figure to
change the print position.
Normally, the wider the paper,
the right-TPH Spring Box is
farther to the right (out); the
narrower the paper, the
right-TPH Spring Box is farther
to the left (in).
If the problem is still not solved,
please move to next step to adjust
the pressure of TPH Spring Box.
4.
To adjust the TPH Spring Box
pressure, use a flat tip
screwdriver to turn the screw
clockwise to increase the
pressure; counterclockwise to
decrease the pressure.
pressure, use a flat tip
screwdriver to turn the screw
clockwise to increase the
pressure; counterclockwise to
decrease the pressure.
+
-
DuraLabel 7000 User’s Manual
41