Autel Intelligent Tech. Corp. Ltd. MAXISYSMS906BT Manual De Usuario
TPMS Service Operations
Relearn Operations
66
To perform OBDII Relearn function
1. Tap
OBDII Relearn to write IDs to the vehicle directly without performing
further procedures.
2. A message will appear when the sensor IDs are successfully written.
5.4.2 Read IDs from vehicle
This function will read sensor IDs from the test vehicle directly.
To read IDs from vehicle
1. Tap
Read IDs from vehicle in the Relearn screen.
2. The Display Tablet will display the sensor IDs and positions for you to
view. Tap
OK to save data for future review, or Back to exit.
5.4.3 Read DTC
To read DTCs
1. Tap
Read DTC button from the Relearn screen.
2. A data list of TPMS DTCs retrieved from
the vehicle’s ECU will show up.
For more information about read codes, see
5.4.4 Clear DTC
To clear DTCs
1. Tap
Clear DTC from the Relearn screen.
2. The Display Tablet will show a warning message for you to confirm. Tap
Yes to continue, or No to exit.
3. If the erase command is sent successfully, the confirming screen will
display. Tap
ESC on the confirming screen to exit Clear DTC.
4. Run
Read DTC again to ensure the operation is successful.
Erase Codes on page 38.