Cisco Cat 2980G 80xF+ENet RJ45 WS-C2980G-A Hoja De Datos

Cisco Systems, Inc.

All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.

Page 6 of 7

• MAC Addresses: 16,00

• Virtual LANs (VLANs): 1,024

• Fabric: Store-and-Forward

• Queues: Dual Queuing

• Indicators & Interfaces

Catalyst 2980G-A Switch

• System status: Green (operational)/Red (faulty)

• Console (RJ-45 female)

• Reset (switch recessed protected)

• 10/100BASE-T Management (RJ-45 female) data terminal equipment (DTE): Green (good)/ orange (disabled)/

off (not connected)

• 80-port 10/100 Mbps Fast Ethernet Autosensing, Autonegotiating (RJ-45 Female)

– Link: Green (operational)/Red (faulty)

• Two-port 1000BaseX Gigabit Ethernet (GBIC Female)

– Link: Green (operational)/Red (faulty)

Power Supply

• PWR:

– GOOD: Green (good)

– FAIL: Red (faulty)

• SNMP MIB supported

Chassis Physical Specifications

• Dimensions (H x W x D):

– 3.5 x 17.5 x 17 in. (8.89 x 44.45 x 43.18 cm.)

• Two Rack Units (RU) high

• Maximum Weight: 16 lb. (7.3 kg)

• Mounting: 19-in. rack-compatible (rack and cable guide hardware included)

Power Requirements for 2980G-A:

• Input Current:

– 2.3A max. @ 90VAC 50-60Hz

– 1.7A max @ 120VAC 50-60Hz

– 1.2A max @ 180VAC 50-60Hz

– 0.9A max @ 240VAC 50-60Hz

• KVA Rating: 0.208 KVA

• Output Power: 156 watts

• Heat Dissipation: 208 watts (670 BTUs per hour)

• Power factor correction: YES