Bently Nevada Inc. 18531001 Manual De Usuario
Section 2 - Components
5
A Repeater is a node added to the mesh network to
improve data communication. The minimum
transmitting range of a node is 50 m or 165 ft.
Therefore, if the wSIMs are placed more than 50 m
(165 ft) apart, a Repeater may be required between
two nodes to ensure the integrity of the data
communication paths. Repeaters can also be
deployed to provide redundant paths, which are
required in a mesh network to ensure network
reliability.
improve data communication. The minimum
transmitting range of a node is 50 m or 165 ft.
Therefore, if the wSIMs are placed more than 50 m
(165 ft) apart, a Repeater may be required between
two nodes to ensure the integrity of the data
communication paths. Repeaters can also be
deployed to provide redundant paths, which are
required in a mesh network to ensure network
reliability.
Repeaters have the same specifications as a wSIM.
NOTE
FCC & IC Compliance
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
This device may not cause harmful
interference.
interference.
This device must accept any
interference received, including
interference that may cause undesired
operation.
interference received, including
interference that may cause undesired
operation.
The antenna used for this device must be
installed to provide a separation distance of at
least 20 cm from all persons and must not be
co-located or operating in conjunction with any
other antenna or transmitter.
2.3 Manager Gateway
There are two models of the Manager Gateway:
Rack-based and Remote Mount.
Rack-based and Remote Mount.
RF Certifications: FCC: XFU-18551001, IC: 8349A-
18551001
18551001
Rack-based Manager Gateway: P/N 185510-01