Bently Nevada Inc. 18531001 Manual De Usuario
Section 5 - Installing Hardware
29
NOTE
The Manager Gateways is designed to operate with the
antennas listed below that have a maximum gain of 2 dB.
Antennas and cables not included in this list or having a
gain greater than 2 dB are strictly prohibited for use with
this device. The required antenna impedance is 50 ohms.
Antenna included P/N 283189: ½ wave, 5”, 2dBi antenna
Optional antenna kit P/N 185519-01: 2.4Ghz, 12”, 6dBi,
antenna with 75-ft, 50 ohm cable (must be used together
to meet maximum antenna gain. Do not modify the
cable).
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not
more than that permitted for successful communication.
Remote Mount: The remote mount option provides
fiberglass weather-proof housing and mounting
hardware to install the Manager Gateway (P/N
185511-01). Install the base plate into the weather-
proof (WP) housing, mount the Manager Gateway
base module to the WP housing base plate, plug the
Manager Gateway into the base module (P/N
179168-01) and secure using the captured screws
affixed to the Manager Gateway.
fiberglass weather-proof housing and mounting
hardware to install the Manager Gateway (P/N
185511-01). Install the base plate into the weather-
proof (WP) housing, mount the Manager Gateway
base module to the WP housing base plate, plug the
Manager Gateway into the base module (P/N
179168-01) and secure using the captured screws
affixed to the Manager Gateway.