NINGBO COMEN ELECTRONICS TECHNOLOGY CO. LTD SDUN4RF1 Manual De Usuario
Ningbo COMEN Electronics Technology Co.,Ltd
ADRESSE:
No.599 Jinda Road, Zhenhai Economic Development Zone,NINGBO,CHINA
TEL:+86 574 86627878 FAX:+86 574 86627858
E-mail:
E-mail:
sales@comen.com.cn
HTTP: www.comen.com.cn
Features
No wiring, easy operation, just plug and use.
67 million codes, self program function.
Receiver has 5 memory settings, no memory loss forever.
Green LED indicator for POWER ON and PROGRAMMING SETTINGS.
Installation
Controller (Receiver):
Just plug-in receiver into wall outlet, indicator on receiver should light on.
Connect lamp or appliance plug (fig 1) into the socket of receiver
Connect lamp or appliance plug (fig 1) into the socket of receiver
Remote Control (Transmitter):
Remote control up to 30meters in open area (fig. 2)
Operation transmitter
ON button
ON button
– control receiver ON
OFF button
– switches OFF all function
GROUP button
– ALL ON or ALL OFF at the same time
Operation on/off receiver
Press transmitter button ON to switch on.
Press transmitter button OFF to switch off.
Press transmitter button ON to switch on.
Press transmitter button OFF to switch off.
How to link a code
To start program your transmitter with the receiver
Receiver plugged on power
To start program your transmitter with the receiver
Receiver plugged on power
(fig. 1)
.
Bring the transmitter near the receiver, push the self-learning code button on receiver
Receiver LED will blink slowly, press transmitter selected ON button
Receiver connected lamp will blink twice, code is confirmed and LED stops blinking.
Receiver LED will blink slowly, press transmitter selected ON button
Receiver connected lamp will blink twice, code is confirmed and LED stops blinking.
Receiver has 5 memory settings
Self program function receiver has 5 memory settings.
It can be programmed as to your requirement for scene setting. It can be programmed to switch on at
Self program function receiver has 5 memory settings.
It can be programmed as to your requirement for scene setting. It can be programmed to switch on at
one time individually or programmed with different combinations switching at same time.
This means one receiver can be programmed into max. 5 different combination to the transmitter
button.
To change or delete code
Individual delete:
Push the self-learning code button once, LED will blink slowly
(fig. 1)
.
Press selected OFF button on transmitter, programmed memory is deleted.