Shanghai Transportation Investment Information Technology Co.LTD BIST2400 Manual De Usuario
TAG_A_0.0 (Wireless Beacon Transmitter)is a kind of active RFID tag. The
signal which TAG_A_0.0 transmits can be read by READER_A_0.0.1 from 1
meter to 100 meters away.
TAG_A_0.0 and READER_A_0.0.1 compose the Bus Identify System.
In this system, a tag (TAG_A_0.0) that is pasted on the windshield of the bus can
transmit signal continually. The reader (READER_A_0.0.1) that is fixed on some
building can receive the signal, analyze the ID of the tag (which is engraved on
the panel of the tag) to locate the bus which the tag pastes on at that moment,
report the relevant information to the server through the network. A lot of readers
that are fixed on different buildings can report a lot of location information to the
server. And the server can use the information to locate these buses at real time.
This application helps the manager monitor the detailed track of the buses and
dispatch the buses efficiently.
TAG_A_0.0 includes MSP430F2001 which is used as MCU, nRF2402G which
is used as a transmitter, a crystal which supplies clock signal for nRF2402G ,a
3V lithium battery(CR3032) which is used as power supply of TAG_A_0.0, a
monopole antenna on the PCB and a few external passive components.
MSP430F2001 sends the data which includes ID of the tag to nRF2402G and
controls nRF2402G through a 3-wire interface. And the nRF2402G sends an RF
signal to the antenna which acts as a radiator and propagates the signal to the
air.
TAG_A_0.0 transmits a RF data frame every 683 milliseconds. The data frame
includes the information such as the ID number of the tag and the quantity of
electricity of the battery, etc.
Block diagram of TAG_A_0.0
MCU
MSP430F2001
(TI)
2.4GHz RF
Transmitter
nRF2402G
(Nordic)
16MHz
Crystal
2.4~2.4835
GHz
Battery
CR3032