Phonetone Technology Co. Ltd. PTEC70 Manual De Usuario
5 / 6
STARTING THE AMPLFIER
The signal is received by the outside antenna from the cell tower, then amplified and
transmitted to your phone through the inside antenna. When the phone transmits, the
signal is received by the inside antenna, then amplified and transmitted to the cell tower
through the outside antenna.
Now you are ready to make and receive cell phone calls with powerful signal
amplification! Note that it is normal for the Amplifier’s case to be warm during
operation.
Press any cell phone key to refresh its communication with the base station. If your
signal is weak, having this Amplifier installed and operating properly will give you a large
increase in the signal strength and quality. The change in the signal strength can be
seen on the visual display of your cell phone, and heard on your receiver or headset. To
see the difference, try operating your phone in an area that is known to have weak cell
phone signals. You will be amazed at the dramatic difference the PHONETONE Signal
Amplifier provides!
TROUBLESHOOTING AND SUPPORT
During using your Amplifier, if the Amplifier interferes with your radio or other electronic
device, move the Amplifier further away from those devices, you might be able to solve it
yourself.
If necessary,please contact your local dealer or send e-mail to our support team by the
following methods:
E-mail: support@phonetone-tech.com
If you want to know about Phonetone Company and products for more information,
please visit at:
www.phonetone-tech.com