Landis+Gyr Technology Inc. ER6R1S4 Manual De Usuario
Draft
Landis+Gyr
Chapter 4 - Deploying Endpoints
User Guide
98-1723 Rev AB
25
Figure 4 - 4. Import Installation File
The Import Installation File window provides a .csv template link, that may be used to create
the IIF.
the IIF.
2. Type the file location path into the text box
...or...
Click the Browse button to navigate to the appropriate file.
3. Click OK to upload the file.
Figure 4 - 5. Import Installation File
If an error occurs in the import of the Installation File, results will be displayed immediately in the
browser.
browser.
The following status values may be displayed:
•
Pending: This is an unused status value and not applicable.
•
Pending Init Push: The modules will transition to Normal when the InitPush is received.
•
Successful: The Init Push has been received from the modules, and they are in
Discovered state.
Discovered state.
•
Failed: The Import Installation file failed for some modules.
Time Zone
In order for a module to time stamp events, it must be programmed with appropriate time zone set-
tings. If provided with time zone data, Command Center will issue commands that indicate the time
zone in which the meter is installed and whether Daylight Savings Time (DST) is observed. For
those utilities that span multiple time zones, the installer should include the time zone in the Installa-
tion File.
tings. If provided with time zone data, Command Center will issue commands that indicate the time
zone in which the meter is installed and whether Daylight Savings Time (DST) is observed. For
those utilities that span multiple time zones, the installer should include the time zone in the Installa-
tion File.
To make it easy for installers to specify a time zone, the Time Zone List link will open a document
that displays a list of valid time zone designations by country, shown in Figure 4 - 6.
that displays a list of valid time zone designations by country, shown in Figure 4 - 6.
NOTE: The cellular modules will have the time zone programmed at the time of manufacturing. It is