Giant Telecom Limited OL5800H Manual De Usuario
6813 User Manual
22
7.
Saving the contents of REDIAL to Speed Dial memory
In idle mode, press ‘REDIAL’, then press ‘MEM.’. The display will show ‘LOCATION ? X’. Press ‘MEM.’ to
confirm, OR, press a digit key to select a different memory location. The display shows ‘MEM X STORED’.
In idle mode, press ‘REDIAL’, then press ‘MEM.’. The display will show ‘LOCATION ? X’. Press ‘MEM.’ to
confirm, OR, press a digit key to select a different memory location. The display shows ‘MEM X STORED’.
z
No activity for 20 seconds will return the phone to standby mode.
24 Dialing Digits
Digits which can be dialed are : 0,1,2,3,4,5,6,7,8,9,*,#,PAUSE.
-
‘#’ will be displayed as ‘
ٱ
’ in line2, ‘#’ in line3
-
‘*’ will be displayed as ‘
ٱ
’ in line2, ‘*’ in line3
-
PAUSE will be displayed as ‘P’. When PAUSE is encountered during dialing, a pause of 4 seconds will be
generated.
generated.
25 Call Timer
1.
The call timer comes up automatically when you are in TALK mode, on the 3
rd
line of the display. After 10 seconds,
the call timer will appear as dialing activities are completed.
2.
The call timer counts up to 999 minutes and 59 seconds. After that, the timer will show ‘0:00’.
3.
When handset goes idle (on hook), the call timer will remain on the display for 5 seconds.
26 Battery/Voltage Low Detection
1.
Battery detection is engaged at all times, except while the Handset is charging.
2.
If a low battery condition is detected, then the Handset will enter into ‘Battery Low’ condition, and will beep at 10
second intervals. Your Handset will change to ‘Halt’ mode immediately and continue to beep. If the Handset is in
TALK mode, it will change to ‘Halt’ mode immediately and continue to beep after the call ends. The display will
show ‘BATTERY LOW’.
second intervals. Your Handset will change to ‘Halt’ mode immediately and continue to beep. If the Handset is in
TALK mode, it will change to ‘Halt’ mode immediately and continue to beep after the call ends. The display will
show ‘BATTERY LOW’.
3 Once the battery is recharged, the Handset will return to normal operation.
27 Mute
1. Press
‘MUTE’ to mute your microphone while in TALK (off hook) mode. You can hear your party, but they can’t
hear you. Press ‘MUTE’ again to return to normal, two-way conversation.
T
L
1
0
0 :
K
A
10:00
PM
1 0/3 0
B
T
W
L O
Y
R
E
T
A
10:00
PM
1 0/3 0