Giant Telecom Limited X25Z55 Manual De Usuario

 

17

is left, the earliest MISSED call information will be 
displaced. 

  Except for the number that can be stored, some ‘Absent 

reason’ will also be stored in the call log.

 

 

  Two kinds of message waiting are considered: VWMI 

ON and VWMI OFF. 

  Message waiting management is independent of call log.   
  MSG LED on base is flashing or not flashing to indicate 

message waiting or no message waiting exist 

  Any type of CID with VWMI ON to activate MSG LED 

flashing, whereas any type of CID with VWMI OFF to 
deactivate it. 

  User can clear message waiting manually through 

‘CLEAR MSG’ under ‘BASE’ menu. 

  When the handset is connecting with the external line, 

caller ID can also be indicated if off-hook caller ID 
signal is detected from the telephone. The caller’s 
number will be shown for 8 seconds. 

  The caller’s number will be saved to the call log and the 

entry will become as unread call. 

  The previous caller ID information can be read by 

choosing ‘Call Log’ from the menu.     

  Alternatively, users can press the [ /

] 

key during 

standby to view the list. 

  If there is no caller ID information, the following screen 

can be seen for 2 seconds before reverting back to 
standby mode. 

  If there is caller ID information, the most recently 

received caller’s number will be shown first. If the call 
information has not been read before, the ‘CLI’ icon 

 

will be on.   

  After the unread caller ID is read, it will become missed 

call and be removed from unread list. 

  Phone book number matching will be performed on the 

caller number in call log as well. If there is a match, the 
name of the caller for that entry will be firstly shown. 

  If the name has more than 9 characters, the rest of the 

name will be omitted. Press [MENU/

] to view the 

number or name in the next row. 

  Besides ‘0’-‘9’, only‘*’ and ‘#’ could be displayed in the 

number field. 

  Apart from the number can be stored, some ‘Absent 

reason’ will also be stored in the call log. 

  Press [MENU/

] or [

/

]

 to view the next or 

previous caller ID information. 

  If the caller information for an entry has been read before, 

the ‘CLI’ icon 

  will not appear. 

  If caller ID name is not provided, the first page show 

blank as, 

  If the caller’s number is too long to be seen at once, 

pressing [MENU/ ] to show the unseen content on the 
right.  

  If date-time information is available, user may press 

[MENU/ ] to view the date-time information (MM/DD 
hh:mm, 24 hour) located at the end of the current call log 
entry. 

  To operate the caller ID number from call log, choose