Giant Telecom Limited X25Z55 Manual De Usuario
4
IMPORTANT:
Please make sure you completed the Handset battery
installation first, before you plug in the Base Adaptor.
Please make sure you completed the Handset battery
installation first, before you plug in the Base Adaptor.
1. Inserting the batteries
Open the battery compartment by sliding the cover down.
Insert two AAA batteries in the compartment, ensuring
correct polarity.
Insert two AAA batteries in the compartment, ensuring
correct polarity.
The handset does not work if the wrong
batteries are inserted. It is also possible that
the handset could be damaged as a result.
Replace the cover on the battery compartment
batteries are inserted. It is also possible that
the handset could be damaged as a result.
Replace the cover on the battery compartment
and slide it on until it locks in place. Place the handset in the
base or charging station. An acoustic acknowledgement is
issued and the charging indicator signals the charging process
has started. Allow the batteries to be charged for 14 hours
without interruption the first time they are charged. When
possible, only remove the handset from the station when the
charging process has been completed. This ensures optimum
operation.
base or charging station. An acoustic acknowledgement is
issued and the charging indicator signals the charging process
has started. Allow the batteries to be charged for 14 hours
without interruption the first time they are charged. When
possible, only remove the handset from the station when the
charging process has been completed. This ensures optimum
operation.
2. Connecting the Base Station and
Power Plug
Connecting the plugs to the corresponding sockets in the base
station (they can not be connected incorrectly because the
sockets and plugs are designed prevent reverse poling). Lay
the cable under the telephone to the rear. Plug the telephone
line in the telephone connection socket. Insert the power plug
at the other end in the power outlet. The base station in now
ready to operate.
station (they can not be connected incorrectly because the
sockets and plugs are designed prevent reverse poling). Lay
the cable under the telephone to the rear. Plug the telephone
line in the telephone connection socket. Insert the power plug
at the other end in the power outlet. The base station in now
ready to operate.
Only use the connection cable supplied.