Meru Networks Inc. AP433E Manual De Usuario

© 2010 Meru Networks, Inc. 

AP400 

The AP400 Access Point series delivers high performance, full-speed, Wi-Fi certified 
802.11n based on draft 2.0 connectivity while simultaneously supporting legacy 
802.11a/b/g devices. AP400 is available in the configurations shown below.

Features for the AP400 include:



802.11n support with channel bonding in both 2.4GHz and 5GHz frequency bands. 
Channel bonding combines two 20Mhz channels into a single-wide 40Mhz channel 
for increased throughput.



Dual-band external antenna options optimized for MIMO mode.



Plug and Play deployment using centralized controller platforms.



Multi-layered security including standard WPA2, 802.11i security (such as 
automatic traffic inspection).



Each of these Access points may be powered by a standard 802.3af or 802.3at PoE 
device. However, in order to utilize all three radios in 3x3 operation, 802.3at PoE 
is required.



Air Traffic Control technology for 802.11n devices and legacy a/b/g devices 



3x3 MIMO with 3 chains and 3 receive chains, delivering two spatial streams 



Channel span architecture which requires no channel planning or configuration



Eight standard multiband, omni-directional antennas for AP433e.



Powered by 5 volt DC input, 802.3af compliant PoE device, or draft 802.3at 
compliant PoE device.

AP433e

Three dual-band 802.11n radios with 3x3 MIMO and external 
antennas.