Hong Kong Bright Bridge Group Co. Ltd. BUMM012013TS Manual De Usuario
BUMM
T-SOUND X
USER GUIDE / ENGLISH
Features
Setup
Charging
LED status indicator
Step 1
Step 2
Step 3
1. Slide the switch to the right to Power on.
2. LED will turn solid Blue.
2. LED will turn solid Blue.
1. Press the bluetooth button until LED is blinking RED/BLUE.
1
2
3
4
5
6
7
8
11
9
10
1. LED Status indicator
2. Previous track
3. Play/Pause/Mute
4. Next track
5. Volume down
6. Pairing/Receive call/hang up
7. Volume up
8. Microphone
9. Line In
10. Mini USB charging
port
port
11. Power On/Off
1. Turn on your Bluetooth device and search for T-Sound X.
2. Click connect to T-Sound X and wait until LED turns solid blue.
3. Once successfully pairing, will remain connected.
4. To connect to others devices, repeat Step 2 and 3.
2. Click connect to T-Sound X and wait until LED turns solid blue.
3. Once successfully pairing, will remain connected.
4. To connect to others devices, repeat Step 2 and 3.
1. When LED is blinking RED, it means Low battery. Please plug the
mini USB cable into T-Sound X to recharge the battery.
2. LED indicator will show RED color when is charging.
3. First time charging is recommended 4 hours.
mini USB cable into T-Sound X to recharge the battery.
2. LED indicator will show RED color when is charging.
3. First time charging is recommended 4 hours.
Solid Blue =
Power On / Charged
Blinking Blue =
Stand By
Solid Red =
Charging
Blinking Red =
Low Battery
Solid Green =
Line in
Blinking Green =
Low Battery
Stand by mode: 1. T-Sound X will enter in stand by mode in 10 min.
if no bluetooth device is connected.
2. Touch any key to wake up.
Line in
For more information, please visit:
www.bumm-sound.com
1. Plug the stereo cable into T-Sound X Line in port and connect
the other end to any line in device, such a notebook, phone, tablet.
2. LED indicator will show green color.
the other end to any line in device, such a notebook, phone, tablet.
2. LED indicator will show green color.
Troubleshooting
The speaker doesn’t work or it won’t pair:
Speakerphone
• When prompt with password, please type”0000”
• Is the speaker turned on and charged?
• Try moving your device closer.
• Try repeating the setup procedure in this guide
or pair with a different Bluetooth device.
• If pairing with a computer, specify the T-Sound X
as the audio out device on the computer.
• Turn the speaker off and press Bluetooth button
to pair again with T-Sound X
• Is the speaker turned on and charged?
• Try moving your device closer.
• Try repeating the setup procedure in this guide
or pair with a different Bluetooth device.
• If pairing with a computer, specify the T-Sound X
as the audio out device on the computer.
• Turn the speaker off and press Bluetooth button
to pair again with T-Sound X
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
1. Press the bluetooth button to receive call.
2. Long press the bluetooth button to hang up.
2. Press Play/Pause button to mute or switch to phone mode.
2. Long press the bluetooth button to hang up.
2. Press Play/Pause button to mute or switch to phone mode.
Safety information
Please read these safety warnings and cautions carefully
to ensure your personal safety and prevent property damage.
• Do not expose your T-Sound X to liquid, moisture, humidity, or rain.
• Do not use the T-Sound X near a bathtub, sink, sauna, pool, or steam room.
• Exposure of the T-Sound X to moisture could result in electric shock.
• Do not drop, disassemble, open, crush, bend, deform, puncture, shred,
microwave, incinerate, paint, or insert foreign objects in to the T-Sound X.
Such actions could result in electric shock. Clean theT-Sound X only with a dry cloth.
• Do not expose your T-Sound X to extremely high or low temperatures.
• Do not leave your T-Sound X in direct sunlight for extended periods of time.
• Do not leave your T-Sound X near open flames such as cooking burners, candles, or fireplaces.
• Do not block any ventilation openings.
• Do not use the T-Sound X near a bathtub, sink, sauna, pool, or steam room.
• Exposure of the T-Sound X to moisture could result in electric shock.
• Do not drop, disassemble, open, crush, bend, deform, puncture, shred,
microwave, incinerate, paint, or insert foreign objects in to the T-Sound X.
Such actions could result in electric shock. Clean theT-Sound X only with a dry cloth.
• Do not expose your T-Sound X to extremely high or low temperatures.
• Do not leave your T-Sound X in direct sunlight for extended periods of time.
• Do not leave your T-Sound X near open flames such as cooking burners, candles, or fireplaces.
• Do not block any ventilation openings.
P11
P12
• Do not dispose of your T-Sound X in a fire.
The battery could explode causing injury or death.
• Only charge the battery in accordance with the user instructions
supplied with the T-Sound X.
• Do not attempt to disassemble the T-Sound X charger or
force open the built-in battery because this may result in electric shock.
• Do not charge the T-Sound X in damp areas or in extremely high or
low temperatures because this could result in electric shock.
• Do not clean the T-Sound X when it is being charged.
• Do not leave or store the T-Sound X or any of its accessories near or
over your automobile’s air bag because serious injury may result when an air bag deploys.
• Do not place the T-Sound X on high surfaces such as shelves.
During music playback the T-Sound X may move which could cause
the T-Sound X to shift and fall off of the edge.
The battery could explode causing injury or death.
• Only charge the battery in accordance with the user instructions
supplied with the T-Sound X.
• Do not attempt to disassemble the T-Sound X charger or
force open the built-in battery because this may result in electric shock.
• Do not charge the T-Sound X in damp areas or in extremely high or
low temperatures because this could result in electric shock.
• Do not clean the T-Sound X when it is being charged.
• Do not leave or store the T-Sound X or any of its accessories near or
over your automobile’s air bag because serious injury may result when an air bag deploys.
• Do not place the T-Sound X on high surfaces such as shelves.
During music playback the T-Sound X may move which could cause
the T-Sound X to shift and fall off of the edge.
Safety information
CAUTION!
WARNING!
!
!
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party
Responsible for compliance could void the user’s authority to operate this equipment. (Example- use
only shielded interface cables when connecting to computer or peripheral devices).
Responsible for compliance could void the user’s authority to operate this equipment. (Example- use
only shielded interface cables when connecting to computer or peripheral devices).
P11
FCC Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will notoccur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment offand on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will notoccur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment offand on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
P12
CAUTION: