Cellphone-Mate Inc. dba SureCall TRIFLEX-V Manual De Usuario
INSTALLATION
SureCall TriFlex - V Kit for Home
Cellphone-Mate, Inc.
Page 6
All rights reserved.
Installation Instructions
The
TriFlex
booster is suited for installation in a building or home.
Step 1. Connect the Outside Antenna
1.
Mount the fiberglass antenna in an outside mounting location that:
Has at least a 12-inch radius clear of obstructions and other radiating
elements.
Is at least 75 feet in a straight line from the inside antenna when used in an
area prone to weak cellular signals and operating the booster at full 65dB
gain.
gain.
Is not co-located or operating with any other antenna or booster.
2.
Using the CM240 or CM400 cable, connect the outside antenna to the booster
connector marked OUTSIDE (see page 4).
connector marked OUTSIDE (see page 4).
3.
Hand tighten the connection.
IMPORTANT: A minimum separation distance of 30 vertical feet is necessary
between the outside and inside antennas. If the inside coverage is not sufficient, you
may need as much as 80 feet of separation. See the table on page 9.
between the outside and inside antennas. If the inside coverage is not sufficient, you
may need as much as 80 feet of separation. See the table on page 9.
Step 2. Connect the Inside Antenna
1.
Mount the inside antenna:
Omnidirectional dome antenna: mount the antenna on the ceiling in a
central location where you want reception.
Panel antenna: install the antenna against a wall or surface projecting
where you want reception. Stay 6½ feet away from the panel to receive
better reception from the signal booster system.
better reception from the signal booster system.