Zonoki Electronics Manufacturer Co. Ltd FMZ1300 Manual De Usuario

Descargar
Página de 3
Z-1300I Operations Menu 
 
A. Switch on/ off of transmitter 
1.  Plug  the  unit  in  cigarette-lighter  port  of  car  cabinet  to  power  on,  the  LCD  will  show  the  last  working 
frequency. The LCD will show “off", if it is not detected any audio signal within 20 seconds. 
2.  Plug  the  unit  in  cigarette-lighter  port  of  car  cabinet  to  power  on,  the  LCD  will  show  the  last  working 
frequency.  The  unit  will  operate  and  transmit  the  displayed  frequency,  if  it  is  detected  any  audio  signal 
within 20 seconds. 
3.  During the transmission, the transmitter will automatically be turned off, when it is not detected any audio 
signal frequency within 60 seconds. 
 
B.  The operations of transmitter 
Regardless of it is with or without iPod, the transmitter can keep on the operations, when there is any audio 
signal.   
a.  Input the audio signal, detect it after 5 seconds; the transmitter will then be turned on, the LCD will show 
the last frequency. 
b.  When the transmitter is on, press slightly “UP / DOWN" button to adjust the transmission frequency, the 
interval is 0.1 MHz. 
c.  When the transmitter is on, press firmly “Up / DOWN" button to adjust the transmission frequency, the 
whole selection of frequency channel can be accomplished within 8 seconds.   
d.  When the transmitter is on, press slightly on “M" button, checking or adjust the storage frequency record 
of MEMORY-A, MEMORY-B and MEMORY –C. 
e.  When  the  transmitter  is  on,  press  firmly  on  “M"  button  to  enter  the  memory  mode,  store  the  present