Hawking Technologies Inc. HSB1 Manual De Usuario

 

Chapter 3    Wireless LAN Access 

Point Configuration

 

This Access Point provides web-based configuration tools, allowing you to 

configure from wired or wireless stations. Follow the instructions below to 
configure the device. 
 

1.  Make sure your wired station has the same subnet address as the access 

Point.   

The default IP Address and Sub Mask of the access point are: 

Configuring your PC to have the same subnet as the access point.   
1a) Windows 95/98/Me 

1.  Click the Start button and select Settings, then click Control Panel. The  Control 

Panel window will appear. 

2.  Double-click Network icon. The Network  window will appear. 

3.  Check your list of  Network Components. If TCP/IP is not installed, click the Add 

button to install it now. If TCP/IP is installed, go to  step 6. 

4.  In the  Network Component Type dialog box, select Protocol and click Add 

button. 

5.  In the Select Network Protocol dialog box, select Microsoft and TCP/IP and then 

click the  OK button to start installing the TCP/IP protocol. You may need your 

Windows CD to complete the installation. 

6.  After installing TCP/IP, go back to the Network  dialog box. Select TCP/IP from