R-tron Inc. APEX1933 Manual De Usuario
APEX1933 USER
MANUAL V1.2 Tech Support: 1-888-317-8766
32
5.6.2.2 AGC mode “Off” setting
When you want to set gain value not using Auto Gain control refer to the following.
Step 1: For manual gain control AGC must be turned off.
Step 1: For manual gain control AGC must be turned off.
Step 2: The user can select any gain value as long as it does over-drive the amplifier or exceed
isolation requirements. Gain is automatically limited where conditions do not permit high
gain. Select the DL and UL Gain values. Turn on the DL and UL path controls.
gain. Select the DL and UL Gain values. Turn on the DL and UL path controls.