Bellwave Co. Ltd. X101 Manual De Usuario
Standby is the most basic state of your phone. The phone goes into
Standby Mode after you turn it on, or whenever you briefly press
the key. When your phone is in Standby Mode, you will typically see
the current date and time. If you enter a phone number, you can press
the key to dial it, or press the soft key to save it in the internal
Phonebook.
Standby Mode after you turn it on, or whenever you briefly press
the key. When your phone is in Standby Mode, you will typically see
the current date and time. If you enter a phone number, you can press
the key to dial it, or press the soft key to save it in the internal
Phonebook.
Press the key at any time to return to Standby Mode. Be careful;
if you are on a call when you press the key, your phone disconnects
the call and returns to Standby Mode. Press the or soft key
several times or hold it down to return to Standby Mode without
ending the call.
if you are on a call when you press the key, your phone disconnects
the call and returns to Standby Mode. Press the or soft key
several times or hold it down to return to Standby Mode without
ending the call.
Getting Started
21
22
Switching the Phone On or Off
Your Phone’s Modes
� � �
Notes :
●
The color LED on the folder of the phone flashes and an alert sounds.
When your phone locates services, you can see the idle screens on
both the main and sub LCD.
When your phone locates services, you can see the idle screens on
both the main and sub LCD.
●If the phone is out of the service area, No Service appears on the
display and you cannot place and receive calls. Wait a little while for
a better signal or move into an open area to regain service.
a better signal or move into an open area to regain service.
WARNING!
Do not switch the phone on when mobile phone use is prohibited or
when it may cause interference or danger.
when it may cause interference or danger.
� � �
Note : Do not touch the antenna on the phone unnecessarily
when the phone is switched on. Contact with the antenna affects the
call quality and may cause the phone to operate at a higher power
level than otherwise needed.
call quality and may cause the phone to operate at a higher power
level than otherwise needed.
3
When the PIN code of your SIM card is enabled, your phone asks
you to enter the PIN (see page 144). Enter the code, and press
the soft key. Then your phone connects to the GSM
network.
you to enter the PIN (see page 144). Enter the code, and press
the soft key. Then your phone connects to the GSM
network.
Standby Mode
Talk Mode
1
Open the folder.
2
Press and hold the key for more than one second to switch
the phone on.
the phone on.
� � �
Note : If you switch the phone on without a SIM card,
the phone prompts you to insert the card. You can only make
emergency calls by pressing the soft key.
emergency calls by pressing the soft key.
4
When you wish to switch the phone off, hold the key for
more than two seconds.
more than two seconds.
You can place and answer calls only when your phone is turned on.
During a call, the phone is in Talk Mode. While you are in the talk
mode, pressing the soft key gives you a list of options.
See page 34 for details.
During a call, the phone is in Talk Mode. While you are in the talk
mode, pressing the soft key gives you a list of options.
See page 34 for details.
Getting Started