BMI Technologies Inc. RFVI Manual De Usuario

DRAFT G FORCE PLUS RF Instruction Manual 

 

 

Doc #RF1 Rev.9 

Apr/08 

 
 
 
 
 
 
 
 
 
3.  Supply the Transceiver with 110v power. 

‰ 

Plug the power supply of the AC adaptor into a standard 110v outlet. 

‰ 

Connect the other end of the adaptor to the Transceiver. 

 
4.  Install and connect the Host Cable (Host Transceiver only). 

‰ 

Feed the Host Cable between the Host Transceiver and the computer running the Software. 

‰ 

Plug the Host Cable’s 6-pin male connector into the 6-pin female receptacle on the Host 
Transceiver. 

‰ 

Secure the connector. 

‰ 

Secure the Host Cable within 12” of the connector to prevent accidental disconnection. 

 
5.  Connect the Host Cable and the Signal Converter (Host Transceiver only). 

‰ 

Connect the individual wires in the Host Cable to the Signal Converter as shown in the diagram 
below, matching the labeling on the wires and the Converter 

 

6.  Connect the Host Transceiver and the computer. 

‰ 

Insert the Signal Converter’s 9-pin female receptacle into the computer’s 9-pin serial port.