BMI Technologies Inc. VUI00 Manual De Usuario

DRAFT G FORCE PLUS & G FORCE PLUS RF Instruction Manual 

 

 
Nov 2005

Doc #RF1 Rev.2 

 

 

 

p.  Remove the Data Logger from the Software Interface and press Cancel.  The LCD will display 

“Action?(1-9)” 

2.  Place the Vehicle into Maintenance Lockout. 
3.  Program the Vehicle’s Hot Card List with the Data Logger. 

a. Press 

Enter to start the Data Logger. 

b. Press 

8 when the LCD displays “Action?(1-9)”.  The LCD will display “Action?(1-9) Hot Card 

List” 

c. Press 

Enter to accept the choice.  The LCD will display “Hot Card List” 

d.  Present the Data Logger to the Vehicle Interface. 
e.  Listen for a sequence of three quick beeps to indicate the interaction is complete. 
f.  Remove the Data Logger from the Vehicle Interface.  The Vehicle Interface LCD will display 

“HOT CARD LIST UPDATED” 

g. Press 

Cancel on the Data Logger.  The LCD will display “Action?(1-9)”. 

4.  Remove the Vehicle from Maintenance Lockout. 
5.  Repeat steps 2 to 5 for each Vehicle. 

 

 

 
This function is used only in a G FORCE PLUS system.  Each Vehicle Monitor has a clock used to time-stamp 
Events.  The clock requires setting when a Vehicle Monitor is initialized, as well as at Daylight Savings Time 
changes.  A G FORCE PLUS RF system does not use the Data Logger Date / Time function because updates to 
the Vehicle Monitor clock are done via the RF communications link.  
 

6.  Get the PC’s Date / Time.   
q. Press 

Enter to start the Data Logger. 

r. Press 

7 when the LCD displays “Action?(1-9)”.  The LCD will display “Action?(1-9) Date / Time” 

s. Press 

Enter to accept the choice.  The LCD will display “Date / Time: YYYY/MM/DD HH:MM” 

t.  Present the Data Logger to the Software Interface. 
u. Select 

Program | Date Time from the menu of the Fleet Manager software.  The status bar at the bottom 

left of the window will provide progress information. 

 

 

 
 
 

v. Click 

the 

OK button to confirm completion.