Tyco Safety Products / Software House PI26 Manual De Usuario
The apCTest Program
B-16
apC/8X Technical Manual
The first line displayed in Figure B.7 shows a Wiegand 26 card with Facility
Code 204 and a card number of 27445.
Code 204 and a card number of 27445.
Figure B.8: Wiegand 26 Sample Card Data
Test LED
The Test LED operation is no longer supported.
Test CtlPts
The Test CtlPts (Control Points) menu allows you to activate relays
associated with the apC. You can activate individual relays or all at once. You
can cycle through all of them one at a time at a frequency that is configured.
associated with the apC. You can activate individual relays or all at once. You
can cycle through all of them one at a time at a frequency that is configured.
Use F3 and F4 to select control points
Use F5 (Set), F6 (Reset), or F7 (Cycle) to control the control points
Use F8 to control the cycle duration
Use F5 (Set), F6 (Reset), or F7 (Cycle) to control the control points
Use F8 to control the cycle duration
Note: When you exit from the control points menu, the control points
will remain in the state in which you set them. When you exit the
apC Test utility, the control points return to a non activated state.
apC Test utility, the control points return to a non activated state.
Test Mptsts
The Monitor Point test will display the state of selected monitor points
dynamically.
dynamically.
Use F3 to display monitor points 1-16
Use F4 to display monitor points 17-32
Use F5 to display monitor points 33-48
Use F6 to display monitor points 49-64
Use F4 to display monitor points 17-32
Use F5 to display monitor points 33-48
Use F6 to display monitor points 49-64
0 11001100 011010110011010 0
Even
parity
Odd
parity
Facility Code = 204
Card Number = 27445