ads-tec GmbH RAX1X2X Manual De Usuario
User Manual
User Manual
User Manual
User Manual Access Point /Client V 3.0.3
Access Point /Client V 3.0.3
Access Point /Client V 3.0.3
Access Point /Client V 3.0.3
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
29
29
29
29
5.1.3
5.1.3
5.1.3
5.1.3
Power Supply
Power Supply
Power Supply
Power Supply 110/230 VAC
110/230 VAC
110/230 VAC
110/230 VAC
A bushing terminal with threaded connector is used to establish the power supply
connection (diagram shows bushing inside device).
connection (diagram shows bushing inside device).
PIN NUMBER
SIGNAL NAME
1
110/230 V AC
2
PE
3
0 V DC
5.1.4
5.1.4
5.1.4
5.1.4
Power Supply
Power Supply
Power Supply
Power Supply PoE / HOST (IEEE 802.AF)
PoE / HOST (IEEE 802.AF)
PoE / HOST (IEEE 802.AF)
PoE / HOST (IEEE 802.AF)
Wire pairs 4/5 (positive pole) and 7/8 (negative pole) are used for power over Ethernet
functionality.
functionality.
PIN NUMBER
SIGNAL NAME
1
TX +
2
TX -
3
RX +
4
PoE/G
5
PoE/G
6
RX -
7
PoE/-48V
8
PoE/-48V
Note:
Transmission of 48V DC power supply is designed for a maximum feeding distance of 100
meters (approx. 330 ft.) in accordance with Ethernet specification requirements. The
connected devices may draw 350 mA of power; maximum supply power is 15.4 Watts.
meters (approx. 330 ft.) in accordance with Ethernet specification requirements. The
connected devices may draw 350 mA of power; maximum supply power is 15.4 Watts.
For PoE power supply to be possible, all network hubs and switches need to be PoE-
compatible.
compatible.
5.1.5
5.1.5
5.1.5
5.1.5
Fibre Optic
Fibre Optic
Fibre Optic
Fibre Optic Ethernet
Ethernet
Ethernet
Ethernet
The optical connection requires an MTRJ fibre optic connector.
Multimode cable, MTRJ connector to Duplex connector 62.5/125µm.
Multimode cable, MTRJ connector to Duplex connector 62.5/125µm.