ads-tec GmbH RAX1X2X Manual De Usuario
User Manual
User Manual
User Manual
User Manual Access Point /Client V 3.0.3
Access Point /Client V 3.0.3
Access Point /Client V 3.0.3
Access Point /Client V 3.0.3
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
77
77
77
77
Use the drop-down menu to set the correct time zone. GMT (Greenwich Mean Time) is
equivalent to Western European Time and may be adapted depending on local time
differences.
equivalent to Western European Time and may be adapted depending on local time
differences.
Time Synchronisation via NTP Server:
This function allows synchronisation of date and time via an NTP server.
To use this service, activate the check box next to this option and enter the IP address of
the NTP server you wish to use.
the NTP server you wish to use.
Manual Date & Time Configuration:
Alternatively, you may choose to set date and time manually.
Click Activate to confirm your settings.
Note:
Correct date and time settings are essential for verifying certificates, reviewing event logs
and applying time-based rules defined in the Filter Wizard.
and applying time-based rules defined in the Filter Wizard.
Note:
A device reboot should be performed in order for changes to take effect.
8.1.4
8.1.4
8.1.4
8.1.4
User Interface
User Interface
User Interface
User Interface
Use the “User Interface” menu to set the web interface display language to English or
German.
German.
The drop-down menu allows selecting either “apply immediately, do not save” or “do
not apply, save only” as Saving and Applying options.
Choosing “apply immediately, do not save” will add an “Apply” button to all pages in
the Access Point configuration menu. That button can be used to implement any changes
immediately. In order to keep such changes so they remain available after a device reboot,
the user will need to click a disk icon which will subsequently flash up.
The “do not apply, save only” option adds a “Save” button to all pages in the Access
Point configuration menu. Any modified settings will not be implemented, but will be saved
immediately. The device needs to be rebooted for changes to take effect. This option omits
the “Please wait” dialogue shown after a page has been confirmed. Instead of a disk icon,
a reboot icon will appear. Clicking it will take the user to the start page from which a reboot
may be initiated. The “Please wait” screen will still be displayed in some special cases,
such as for example ping tests and firmware updates.
Confirm your settings by clicking Activate.
not apply, save only” as Saving and Applying options.
Choosing “apply immediately, do not save” will add an “Apply” button to all pages in
the Access Point configuration menu. That button can be used to implement any changes
immediately. In order to keep such changes so they remain available after a device reboot,
the user will need to click a disk icon which will subsequently flash up.
The “do not apply, save only” option adds a “Save” button to all pages in the Access
Point configuration menu. Any modified settings will not be implemented, but will be saved
immediately. The device needs to be rebooted for changes to take effect. This option omits
the “Please wait” dialogue shown after a page has been confirmed. Instead of a disk icon,
a reboot icon will appear. Clicking it will take the user to the start page from which a reboot
may be initiated. The “Please wait” screen will still be displayed in some special cases,
such as for example ping tests and firmware updates.
Confirm your settings by clicking Activate.