Crane Electronics Ltd PO Manual De Usuario

GLOSSARY OF TERMS

A group of readings taken. ProWrench Opta stores these readings by default

in the Quick Store mode.

The process of entering and storing the basic parameters which determine the

resulting outputs of ProWrench Opta.

Is the time the torque must be below threshold for the reading to finish.

The direction in which the wrench is turned to apply torque - Clockwise (right)

or Anticlockwise (left).

A series of torque applications to be measured together.

A type of measurement which records the highest torque applied to a trans-

ducer during an operation.

A series of Jobs to be performed together.

Individual torque reading.

The Span is the effective operating range of the wrench. This is the range

between zero and the maximum design limit of the transducer.

The level of torque which a signal must rise above and then fall below to be

considered a valid torque cycle. In the ProWrench II, this is set at 5% of the

rated span of the transducer.

The target torque figure.