TP-Link Technologies Co. Ltd. C5400 Manual De Usuario
84
Chapter 12
Customize Your Network Settings
2. Go to
Advanced
>
Wireless
>
WPS
.
12. 7. 1. Set the Router’s PIN
Router’s PIN is enabled by default to allow wireless devices to connect to the router
using the PIN. You can use the default one or generate a new one.
using the PIN. You can use the default one or generate a new one.
Note:
1. If you want to enable/disable the WPS feature, go to
System Tools
>
System Parameters
>
WPS
, select or clear the
Enable WPS
check box.
2. PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS
supported devices can connect to your router with the PIN. The default PIN is labeled on the bottom of the router.
12. 7. 2. Use the WPS Wizard for Wi-Fi Connections
1. Select a setup method:
•
Push Button(Recommended): Click the
Connect
button on the screen. Within
two minutes, push the WPS button on the client device.
•
PIN: Enter the client’s PIN, and click
Connect
.
2.
Success
will appear on the above screen and the WPS LED on the router will keep on
for five minutes if the client has been successfully added to the network.
12. 8. Schedule Your Wireless Function
The wireless network (2.4GHz, 5GHz-1 and 5GHz-2) can be automatically off at a specific
time when you do not need the wireless connection.
time when you do not need the wireless connection.
1. Visit
http://tplinkwifi.net
, and log in with the username and password you‘ve set for
the router.
2. Go to
Advanced
>
Wireless
>
Wireless Schedule
.
3. Select
2.4GHz
,
5GHz-1
or
5GHz-2
to change the corresponding settings.
4. Toggle On to enable the Wireless Schedule feature.