Impinj Inc. XARRAY Manual De Usuario
Speedway Revolution Installation and Operations Guide Octane 4.11
Appendix C: Speedway xPortal Installation
Appendix C: Speedway xPortal Installation
62
Revision 4.11 Copyright ©2014, Impinj, Inc.
b) It may be necessary to temporarily disconnect RF cables. The Reader must be powered
off to access the mounting holes.
5) Next Steps
off to access the mounting holes.
5) Next Steps
a) Set up the Reader following instructions in the Speedway Revolution Installation and
Operations Guide.
b) Develop your controlling application using the LLRP Toolkit.
c)
Hub Feature Enable and Diagnostics Using the Web-UI
1. Connect the Reader using a web browser http://<reader name or IP address> to enable
features and diagnostic tools
Examples: http://speedwayr-10-00-DD or http://10.0.10.44.
2. Log in to the Reader;
user name: root
password: impinj
password: impinj
When the Antenna Hub feature is enabled, the Antenna Hub section on the main Reader
web page will display Enabled. Click Show for the Antenna Hub Page.
web page will display Enabled. Click Show for the Antenna Hub Page.
Figure D.2 Close-up of Antenna Hub Section of Management Web Page
Click Show for the Antenna Hub web page and click the Check Connections button to
query the Antenna Hub connection state. This causes the Reader to query each port for a
connected Antenna Hub status. Click Stop Checking to stop querying the Reader for
connection states.