IDS GeoRadar Srl SRS-FW400 Manual De Usuario
IDS Ingegneria Dei Sistemi S.p.A.
Protocol: MN/2009/030 - Rev. 1.2
Safe Rail System Data Acquisition Software
57
/
76
2.
The name of the selected acquisition can be chan ged usin g the
button in the window shown in Fig. 4-33.
Write the new name of the selected acquisition in the window shown in
the window in Fig. 4-37; once the new name has been set, p ress the
OK button to confirm.
the window in Fig. 4-37; once the new name has been set, p ress the
OK button to confirm.
Fig. 4-37 – Rename Acquisition Window
3.
Any p reviously saved acquisition can be deleted by p ressing the
button in the window shown in Fig. 4-33 using
the window shown in Fig. 4-38; the delete op eration has to be
confirmed by p ressing the
confirmed by p ressing the
YES button in this window.
Fig. 4-38 – Delete acquisition window
4.
Pressing the
button from the window shown in
Fig. 4-33 reloads the last acquisition, enab lin g y ou to continue
p erforming other scans in the same acqu isition area, fo llowin g the
p rocedure described in Par.4.6.
p erforming other scans in the same acqu isition area, fo llowin g the
p rocedure described in Par.4.6.
5.
Pressing the
button shown in Fig. 4-7 closes
down the software. Before closing it down, the sy stem reminds y ou to
disconnect the Radar Control Unit with the message window shown in
Fig. 4-18.
disconnect the Radar Control Unit with the message window shown in
Fig. 4-18.