Planet Technology Corporation ADW4401 Manual De Usuario

Descargar
Página de 74
3.3 LAN   
The LAN setup includes two parts – LAN Interface and DHCP Settings. 
3.3.1 LAN Interface Settings 
There are the IP settings of the LAN Interface for the device. These settings may be referred 
to as Private settings. You may change the LAN IP address if needed. The LAN IP address 
is provided to your internal network and cannot be seen on the Internet. 
You can change the LAN IP address for your requirements. The default LAN IP is 
192.168.1.1. You can also enable the Secondary LAN IP function in this page. It will allow 
LAN Interface to have the alias IP for management. 
   
IP Address: Enter the IP address of your ADSL router in dotted decimal notation, for 
example, 192.168.1.1 (default setting). 
IP Subnet Mask: Your ADSL router will automatically calculate the subnet mask based on 
the IP address that you assign. Unless you are implementing sub netting, use the subnet 
mask computed by the ADSL router. 
Note: Please Commit/Reboot if you want to make this settings effective immediately
 
3.3.2 DHCP Server Settings 
Enable the DHCP Server if you are using this device as a DHCP server. This page lists the 
IP address pools available to hosts on your LAN. The device distributes numbers in the pool 
to hosts on your network as they request Internet access. 
You can setup DHCP server to assign IP address to your PC automatically. You can also 
manually assign an IP according to the MAC address of PC’s network card. The ADSL 
28