Instrumentarium Dental PaloDEx Group Oy SM Manual De Usuario
2 Capturing intraoral images
200150 rev 3
Instrumentarium Dental
13
2.4
U
SING
TWO
SIZES
OF
SENSORS
It is assumed here that both sensor size 1 and sensor size 2 have
been installed and enabled from the installed device -menu on the
Cliniview software. It is also assumed that the appropriate sensor
device has been configured as the default sensor device using the
Tools - Intra-Sigma M settings -menu of the Cliniview software. See
the Sigma M installation manual for details.
been installed and enabled from the installed device -menu on the
Cliniview software. It is also assumed that the appropriate sensor
device has been configured as the default sensor device using the
Tools - Intra-Sigma M settings -menu of the Cliniview software. See
the Sigma M installation manual for details.
When both sensor sizes are installed, image capturing icons for both
size 1 and size 2 sensors are displayed in the CliniView software. The
image capturing can be started for either one or two sensors.
size 1 and size 2 sensors are displayed in the CliniView software. The
image capturing can be started for either one or two sensors.
Buttons from left to right:
- Image capturing with template (size 2)
- Quick image capturing (size 2)
- Image capturing with template (size 1)
- Quick image capturing (size 1)
- Image capturing with template (size 2)
- Quick image capturing (size 2)
- Image capturing with template (size 1)
- Quick image capturing (size 1)
The image capture can be started as described in the previous
chapter, with either of the sensors installed in the system. It is also
possible to use both size 1 and size 2 sensor during one image
capture session.
chapter, with either of the sensors installed in the system. It is also
possible to use both size 1 and size 2 sensor during one image
capture session.
NOTE!
Both sensors can be activated simultaneously by clicking image
capture icon of both sensor before exposure. The sensor that receive
x-ray sends the image to CliniView. The other sensor remains ready
for exposure.
capture icon of both sensor before exposure. The sensor that receive
x-ray sends the image to CliniView. The other sensor remains ready
for exposure.
If two sensors are activated simultaneously, there will be two sensor
status bars on the PC screen.
status bars on the PC screen.
1
Start CliniView software and select a patient.
2
Switch on the sensors to be used by pressing the sensor power
switch.
switch.
3
Protect the sensor with a hygienic cover and place the sensor to
the holder.
the holder.
4
Start image capturing in Cliniview by pressing the Start intraoral
image capturing -button.
image capturing -button.
5
Position the sensor in the patient´s mouth. The sensor unit can be
either on patient’s chest or with the magnetic mounting on the
side of the x-ray unit tube head. Position the Intraoral x-ray unit as
appropriate.
either on patient’s chest or with the magnetic mounting on the
side of the x-ray unit tube head. Position the Intraoral x-ray unit as
appropriate.
POWER
SWITCH
SWITCH
2 Capturing intraoral images
200150 rev 3
Instrumentarium Dental
13
2.4
U
SING
TWO
SIZES
OF
SENSORS
It is assumed here that both sensor size 1 and sensor size 2 have
been installed and enabled from the installed device -menu on the
Cliniview software. It is also assumed that the appropriate sensor
device has been configured as the default sensor device using the
Tools - Intra-Sigma M settings -menu of the Cliniview software. See
the Sigma M installation manual for details.
been installed and enabled from the installed device -menu on the
Cliniview software. It is also assumed that the appropriate sensor
device has been configured as the default sensor device using the
Tools - Intra-Sigma M settings -menu of the Cliniview software. See
the Sigma M installation manual for details.
When both sensor sizes are installed, image capturing icons for both
size 1 and size 2 sensors are displayed in the CliniView software. The
image capturing can be started for either one or two sensors.
size 1 and size 2 sensors are displayed in the CliniView software. The
image capturing can be started for either one or two sensors.
Buttons from left to right:
- Image capturing with template (size 2)
- Quick image capturing (size 2)
- Image capturing with template (size 1)
- Quick image capturing (size 1)
- Image capturing with template (size 2)
- Quick image capturing (size 2)
- Image capturing with template (size 1)
- Quick image capturing (size 1)
The image capture can be started as described in the previous
chapter, with either of the sensors installed in the system. It is also
possible to use both size 1 and size 2 sensor during one image
capture session.
chapter, with either of the sensors installed in the system. It is also
possible to use both size 1 and size 2 sensor during one image
capture session.
NOTE!
Both sensors can be activated simultaneously by clicking image
capture icon of both sensor before exposure. The sensor that receive
x-ray sends the image to CliniView. The other sensor remains ready
for exposure.
capture icon of both sensor before exposure. The sensor that receive
x-ray sends the image to CliniView. The other sensor remains ready
for exposure.
If two sensors are activated simultaneously, there will be two sensor
status bars on the PC screen.
status bars on the PC screen.
1
Start CliniView software and select a patient.
2
Switch on the sensors to be used by pressing the sensor power
switch.
switch.
3
Protect the sensor with a hygienic cover and place the sensor to
the holder.
the holder.
4
Start image capturing in Cliniview by pressing the Start intraoral
image capturing -button.
image capturing -button.
5
Position the sensor in the patient´s mouth. The sensor unit can be
either on patient’s chest or with the magnetic mounting on the
side of the x-ray unit tube head. Position the Intraoral x-ray unit as
appropriate.
either on patient’s chest or with the magnetic mounting on the
side of the x-ray unit tube head. Position the Intraoral x-ray unit as
appropriate.
POWER
SWITCH
SWITCH
Approved
Reviewed: Anttila Mika Johannes 02.05.07 09:54:49
Approved: Levälampi Juhani Eemeli 02.05.07 12:02:32
See the PaloDEx Group Oy PDM system to determine the status of this document. Printed out: 04.05.07 12:38:31
Approved: Levälampi Juhani Eemeli 02.05.07 12:02:32
See the PaloDEx Group Oy PDM system to determine the status of this document. Printed out: 04.05.07 12:38:31