Mitel Deutschland GmbH 68635RFP36U-01 Manual De Usuario
Configuration and Administration
239
If the
Overwrite existing addresses parameter is not enabled, an IP address is only assigned if the IP
address field of the target RFP is empty.
7.7.6.3 Configuration Parameters
The following table lists the available configuration parameters for the RFP.
The following table lists the available configuration parameters for the RFP.
Parameter
Mandatory/Optional Description
Use local configuration
Mandatory
Specifies whether the local configuration settings should
be used at boot-up or not
be used at boot-up or not
IP address
Mandatory
IP address of the RFP
Net mask
Mandatory
Subnet mask of the IP network
TFTP server address
Mandatory
IP address of the TFTPO server (set to 0.0.0.0 if not used)
TFTP file name
Mandatory
The boot file to be read from the TFTP server
TFTP server list
Used only by:
RFP 32/34
RFP 42 WLAN
Optional
List of additional TFTP servers to load the boot file
Preferred TFTP server
Used only by:
RFP 32/34
RFP 42 WLAN
Optional
TFTP server from which to load the boot file first
IP address
Mandatory
IP address of the OpenMobility Manager
Router
Optional
IP address of the default gateway
DNS address
Optional
IP address of the DNS server
DNS domain
Optional
Domain name of the network
Broadcast address
Optional
Broadcast address for the network
Standby OMM address
Optional
IP address of the standby OMM
VLAN ID
Optional
VLAN identifier
Use VLAN and DHCP
Optional
Specifies whether only the local VLAN configuration
settings should be used when booting or not
settings should be used when booting or not
Syslog server address
Optional
Destination IP address for the syslog file
Syslog server port
Optional
Destination port address for the syslog file
RFP configuration file
server
server
Optional
URL of a server with RFP configuration files
(ipdect.cfg|<MAC>.cfg) alternatively or in addition to OM
Configurator settings.
(ipdect.cfg|<MAC>.cfg) alternatively or in addition to OM
Configurator settings.
Syntax:
{ftp|ftps|http|https}://[user:password@]server/[directory/]
or
tftp://server/[directory/]