Mitel Deutschland GmbH 68635RFP36U-01 Manual De Usuario
Configuration and Administration
261
#
# Automatic OMM database import:
# TFTP / FTP / HTTP(S) URL specifies the import server and file
Parameters
Description
OMM_IF
Interface for communicating with the RFPs (by default: eth0)
OMM_CONFIG_FILE
File that contains the OMM configuration (by default: /opt/SIP-
DECT/tmp/omm_conf.txt)
DECT/tmp/omm_conf.txt)
OMM_RESILIENCY
In case of OMM redundancy, enter the two IP addresses of the
OMMs. See also section 7.15.
OMMs. See also section 7.15.
7.13.4 SPECIFIC COMMANDS – TROUBLESHOOTING
The OMM software is installed but does not work automatically when the PC starts. The command below
stops or starts OMM manually (User root):
stops or starts OMM manually (User root):
/etc/init.d/sip-dect [start|stop|restart].
The command line interface for OMM is accessible via telnet on port 8107.
Malfunction
To check whether OMM is working, see the list of procedures for the “SIP-DECT” process. If OMM does
not start, delete the lock file “/var/lock/subsys/SIP-DECT”.
To check whether OMM is working, see the list of procedures for the “SIP-DECT” process. If OMM does
not start, delete the lock file “/var/lock/subsys/SIP-DECT”.
To delete the OMM configuration remove the OMM configuration file “/opt/SIP-DECT/tmp/omm_conf.txt”
(by default).
(by default).
7.14 UPDATING THE OMM
The procedures for updating an existing DECT installation with new software depend on
•
whether a single OMM or standby OMM installation is used
•
whether the OMM is running on an RFP or PC
The OMM “standby” feature is described in section 7.15.
The update mechanism allows an update of the RFPs with minimum impact to DECT services,
especially for installations with a standby OMM.
especially for installations with a standby OMM.
All RFPs check the availability of a new boot image file automatically when:
•
the DHCP lease is refreshed,
•
the RFP lost the connection to the OMM,
•
one of the service applications running on the RFP must be restarted, and
•
an RFP configuration file update check is done (see section 7.7.7).
Please note:
Make sure that all configured software sources point to the same software
version, so that the OMM and all RFPs are running the same software version.