Geonautics International Pte Ltd 30-0710 Manual De Usuario
TAG-T3 Wombat – User Guide, 1.0.7
Troubleshooting and FAQ
5. TROUBLESHOOTING AND FAQ
If you are having trouble connecting to your
TAG-T3 unit, some tips
are below on how to re-establish contact.
If the problem is occurring during RF Communications,
ensure that the communications settings are correct, refer to
the
the
TAG Comms
user guide for further information.
When a device is not powered for long periods or moves a
great distance while turned OFF, the GPS can take longer
than normal to calculate its first new position. When trying to
force the GPS into calculating a position, set the GPS power
management to always ON (0), then give the unit a GPS,
RST, ensuring the antenna can see sky. Having the unit
stationary may help fast track this operation.
than normal to calculate its first new position. When trying to
force the GPS into calculating a position, set the GPS power
management to always ON (0), then give the unit a GPS,
RST, ensuring the antenna can see sky. Having the unit
stationary may help fast track this operation.
Default TRX interval is ON for 3 mins each half hour, on the
half hour, referenced to local time. When device is first
powered, local time could be incorrect until the GPS can see
the sky and update its internal clocks.
powered, local time could be incorrect until the GPS can see
the sky and update its internal clocks.
Consult your
TAG Comms
user guide on updating drivers for
DL1 Remote Downloader
Contact your local Geonautics representative.
© Geonautics
47
Law Enforcement ONLY