Geonautics International Pte Ltd 30-0710 Manual De Usuario
TAG-T3 Wombat – User Guide, 1.0.7
Commands
4. COMMANDS
4.1
Command Set Notation
The following pages give a complete list of the
TAG-T3’s command
set. Commands may be transmitted to the unit directly using the
Remote Downloader or via the “Direct Connect” cable. All commands
must be terminated with a carriage return / linefeed pair <CR><LF>.
Remote Downloader or via the “Direct Connect” cable. All commands
must be terminated with a carriage return / linefeed pair <CR><LF>.
Commands are sent to and received from the
TAG-T3 unit in a
comma separated ASCII format. With respect to the command set, the
following notation is used
following notation is used
$GO0
Command identifier
[<Unit_Id >]
Optional device serial number
<parameter>
Indicates a parameter is required
[,<parameter>]
Optional parameter
<parameter|parameter>
Choice of parameters i.e. ON|OFF
Sending an appropriately filled out command message to the
TAG-
T3 can change the appropriate parameters for that command. It
should be noted that not all values need to be supplied in order to
change a single value of a multiple parameter command. All that is
required is to ensure that there are the correct number of commas so
that the value being set is in the right location.
should be noted that not all values need to be supplied in order to
change a single value of a multiple parameter command. All that is
required is to ensure that there are the correct number of commas so
that the value being set is in the right location.
Any commands sent to the unit with “blank” values will result in that
parameter being queried and the result returned as part of the reply.
e.g. sending a
parameter being queried and the result returned as part of the reply.
e.g. sending a
$GO0,,CLK,,,,
or $GO0,,CLK
or $GO0,Unit_Id,CLK
or $GO0,Unit_Id,CLK
to the
TAG-T3 will return an acknowledgment containing the current
parameters, for example $GOA,T3-001,CLK,0000,36000,60,180
The
TAG-T3 will acknowledge all commands sent to it with either
an acknowledgment, or an error message. Command
ACKnowledgments and NACKnowledgments that are returned by a
device, have the following notation
ACKnowledgments and NACKnowledgments that are returned by a
device, have the following notation
$GOA
Command ACKnowledgment identifier
$GON
Command Not ACKnowledge identifier
$GOM
Unsolicited message identifier
© Geonautics
18
Law Enforcement ONLY