RIOTEC CO. LTD LS6000B Manual De Usuario

 

5

 
6. Start to aim the scanner at a bar code, you may see data shown on the hyper 

terminal.  

If you are unsure of the scanner configuration or have scanned the incorrect codes, 
please scan the “Reset Configuration to Defaults” barcode. This will reset the 
scanner to its factory settings.                                                                 

       

       

               

           

             
               
 

Do not hold the scanner directly over a barcode at 90˚. Scanning light bounces 

directly back into the scanner from the barcode label is known as specular reflection 

which will create a "dead zone" where decoding is difficult. Practice a few times to 
find what range of angles works best. 

 

Cleaning the scan window is the only maintenance required.    A dirty window may 

affect scanning accuracy. 

 

Wipe the scanner window gently with a lens tissue or other material suitable for 

cleaning optical material.

 

Do not spray water or other cleaning liquids directly onto the window.