CPS Telecom Limited CP101 Manual De Usuario
3.1 Power On / Off
Press and hold the power on Key to switch on or off.
3.2 Adjusting the Radio Volume/ Channel Scan
Adjust the volume level by using ▲ / ▼ key (1-15 steps)
Press and hold ▲ / ▼ key for 2 seconds. Press any key to stop.
3.3 Transmission /Receiving
Press and hold the “PTT” button while speaking at about 5cm from the
microphone for transmission. Release the “PTT” button to return to
standby mode.
3.4 Channel Selection
Press and hold the
, use
or
to select the channel, press PTT key
to confirm and back to receiving mode interface.
3.5 Keypad Lock
3.5 Keypad Lock
Press for 3 seconds to activate and deactivate the keypad lock.
cannot be function.
3.6 Monitor
cannot be function.
3.6 Monitor
Press
key to open the speaker squelch for receiving the weak radio
signal and monitoring channel with unknown CTCSS frequency.
Press
key for 3 seconds to enter the Menu Selection Mode. Press
key to select one of the following features:
Channel select >CTCSS/ DCS>Squelch Level >VOX >Dual Watch
Mode >Key Beep Tone >Busy Channel Lock Out > Transmit LED
indicator >Battery Save >Transmitter Power Select
Press PTT to confirm setting and return to standby mode, the current
setting will be confirmed and quit to standby mode if no action to the
selected feature for more than fifteen seconds.
Mode >Key Beep Tone >Busy Channel Lock Out > Transmit LED
indicator >Battery Save >Transmitter Power Select
Press PTT to confirm setting and return to standby mode, the current
setting will be confirmed and quit to standby mode if no action to the
selected feature for more than fifteen seconds.
3. OPERATION
4. MENU SETTING