BARDL PROFESSIONAL AUDIO CO. LTD. SF-30T Manual De Usuario
0
-6
-20
GAIN
(3) Clip style microphone
1. antenna
2. power
3. low electrical voltage indicate light
4. infrared ray data receiving indicate light
5. radio input 3 pin connector
6. infrared ray data receiving window
7. gain control
1. antenna
2. power
3. low electrical voltage indicate light
4. infrared ray data receiving indicate light
5. radio input 3 pin connector
6. infrared ray data receiving window
7. gain control
2
4
1
DATA
5
3
4 OPERATION METHOD OF MANUAL
(1) LCD panel of the receiver
1 2
6
a: Change the battery
7
6
BATTERY
ACCESS
3
4
5
1. Indicating the intensity of RF signal in 8lattices
2. Indicating the intensity of RF/AF signal in 8 lattices
3. Most of the menu indicated by 6 characters
4. Frequency Unit
5. Receiver selects an antenna channel while it shows A in the effective position, or it
2. Indicating the intensity of RF/AF signal in 8 lattices
3. Most of the menu indicated by 6 characters
4. Frequency Unit
5. Receiver selects an antenna channel while it shows A in the effective position, or it
select antenna channel while it shows B
6. IF there are antennas indicated in the testing position, it shows that the same RF
One battery can work about 8 hours.
When the indicate light is bright, the battery should be renew, as the change above.
When the indicate light is bright, the battery should be renew, as the change above.
2
1
b: Gain control
SF-30T has three position for choosing, choose the suitable position according to your
music instrument.
SF-30T has three position for choosing, choose the suitable position according to your
music instrument.
0: microphone
-6: guitar without soure
-20: guitar with soure
0
0
-6
signals are received, oppositely, it shows there aren't any RF signals.
(2) Instruction
When depress POWER (receiver) or electrical power (transmitter) ,LCD will show the
state of the system.
state of the system.
-6
-20
-20
GAIN
GAIN
.5.
.6.