ASPPEC Co. Ltd. AMR-700W Manual De Usuario
28
9. System setup
9.3. System update
- It is used for update of software function and for update after error correction.
- Update will be automatically performed when the button is pressed after cirx.exe and skin.dll
file are downloaded and saved in the root folder of SD card.
9.4. System information update
It is used to apply the relevant information to the receiver after TX information change,
AP information change and system addition/deletion.
When export button is pressed after executing Network Manager software, netconfig.dat will be
stored and when update button of the receiver is pressed after storing the relevant file in the root
folder of SD card, it will be applied.
9.5. Change password
- It is used to change the existing password.
- Password can be changed by entering the existing password, new password to be used and
new password once again to confirm and then by storing it.
9.6. Calibration
You should setup calibration again if touch screen pointing position is not
correct as you are desired.
Carefully press and briefly hold stylus on the center of
the target
the target
Repeat as the target moves around the screen.
Ⓒ2009 ASPPEC Co.,Ltd. All right reserved