Arcadian Networks Inc. V390I Manual De Usuario
Chapter 2 Physical and Functional Description
V290iA User Guide
11
Figure 4: Arcadian Networks V390i Top View
Interfaces
The following interfaces are available in the V390i:
Six DB-9 serial ports – Four serial ports are available to connect serial devices
such as SCADA devices. Two ports serve as console ports: one for the Cisco
router, and one for the Power and Control Card. For cable specifications refer to
Appendix C: Cable Specifications.
such as SCADA devices. Two ports serve as console ports: one for the Cisco
router, and one for the Power and Control Card. For cable specifications refer to
Appendix C: Cable Specifications.
Three RJ-45 Ethernet ports – Three Ethernet ports are available to connect IP
devices such as security devices. For cable specifications refer to Appendix C:
Cable Specifications.
devices such as security devices. For cable specifications refer to Appendix C:
Cable Specifications.
RF UHF N-Type antenna connector – Use for connecting to the Arcadian
Networks wireless network.
Networks wireless network.
Two TNC WiFi antenna connectors – The Cisco router has wireless routing
capabilities to connect WiFi devices to the enterprise network. For more information
on WiFi antennas, see the Cisco antenna guide:
capabilities to connect WiFi devices to the enterprise network. For more information
on WiFi antennas, see the Cisco antenna guide:
http://www.cisco.com/en/US/products/hw/routers/ps272/prod_brochure0900aecd80
371218.html
371218.html
.
Housing
The V390i is housed in a case designed to be resistant to moisture and extremes in
temperature. The V390i is not intended for field servicing.
temperature. The V390i is not intended for field servicing.
The housing is fully sealed, and uses a pressure valve to equalize pressure inside and
outside the housing while holding out water molecules. The housing is designed to
provide a fully stable environment with the ability to resist moisture even in full
immersion. The housing is held in place by locking screws to maintain a proper seal.
outside the housing while holding out water molecules. The housing is designed to
provide a fully stable environment with the ability to resist moisture even in full
immersion. The housing is held in place by locking screws to maintain a proper seal.