Accton Wireless Broadband Corp. FIU176205T01W Manual De Usuario

  |  Introduction

Hardware Description

–  26  –

A 100BASE-TX RJ-45 port that can be attached to an Internet access 

device, such as a DSL or Cable modem.

The Wireless Broadband Router has four 100BASE-TX RJ-45 ports that can 

be attached directly to 10BASE-T/100BASE-TX LAN segments. 

These port support automatic MDI/MDI-X operation, so you can use 

straight-through cables for all network connections to PCs, switches, or 

hubs. 

The Wireless Broadband Router must be powered with its supplied power 

adapter. Failure to do so results in voiding of any warrantly supplied with 

the product. The power adapter automatically adjusts to any voltage 

between 100~240 volts at 50 or 60 Hz, and supplies 5 volts DC power to 

the unit. No voltage range settings are required. 

Power

On Blue

The unit is receiving power and is operating 

normally.

Off

There is no power currently being supplied to 

the unit.

WLAN

On/Blinking Blue

The 802.11n radio is enabled and
transmitting or receiving data through wireless 

links.

Off

The 802.11n radio is disabled.

WPS

Blinking

WPS authentication is in progress.

Off

WPS authentication is not in progress.

WAN

On Blue

The Ethernet WAN port is aquiring an IP 

address.

Blinking

The Ethernet WAN port is connected and is 

transmitting/receiving data.

Off

The Ethernet WAN port is disconnected or has 

malfunctioned.

LAN1~LAN4

On Blue

The Ethernet LAN port is connected to a PC or 

server.

Blinking

The Ethernet port is connected and is 

transmitting/receiving data.

Off

The Ethernet port is disconnected or has 

malfunctioned.