OvisLink Corp. AIR3G Manual De Usuario

10. Frequent Asked Questions 

 

 

 

                       

AirLive Air3G User’s Manual 

 
 
 
 
 
 

In this chapter, we will address some frequent asked questions about Air3G 
 
 
 
Question

I plug my 3G USB dongle into Air3G, but it can not be recognized 

 
Answer:    Please go to Air3G webpage at 

 and check the USB 

compatibility list.    If your USB is on the compatibility list, please make sure 
you plug in the USB dongle while the Air3G is powered off. 

 

=================================================================== 
 
Question

After Emergency Upgrade, I can’t find my Air3G at 192.168.1.254 

 
Answer:        The Air3G will restore to the previous settings after successful Emergency 

upgrade.  Therefore, the IP address will change to the previous IP address.   
If you still can’t find Air3G in previous address, please do a restore to default 
and the Air3G should appear at 192.168.1.254 

 

==================================================================== 
 
Question

When I wan to use “Site Survey” tool to connect with a AP that has no 

encryption, why does the Air3G report “encryption type mismatch!” and ask 
me to configure the wireless security settings? 

 
Answer:        When you press “Connect” from site survey, the Air3G will first check if the 

current wireless encryption setting is correct.    If not, it will ask you to modify 
the setting.    Therefore, if your current wireless settings has encryption and 
the new AP you want to associate does not use encryption, then the Air3G will 
report the mismatch.    In this case, simple select “Disable” in the encryption 
field and press “Apply Change”.

 

 
 
==================================================================== 
 
Question

When I change my wireless operation mode, why can’t I find my AP anymore? 

 
Answer:        By Default, the DHCP server is turned on in 3G Router mode.    In other 

modes, the DHCP server is turned off.    If you get your IP address 
automatically, then when you change from 3G Router to AP/Client/WDS 
Bridge mode.    Your PC will not be able to get IP address from DHCP server 
anymore; therefore, you should set the IP address manually.