La Crosse Technology TX231RW Manual De Usuario

4. Align the square opening on the bottom or the pole over the    

    square of the mounting bracket.

5. Turn the knob to tighten the bracket to the pole. 

Turn knob to 

tight. Do not 

over tighten

Fahrenheit/

Celsius

Transmission

 Icon

Temperature 

& Humidity 

Alternate

1. Insert 2 AA batteries into the temperature/humidity sensor.

2. The red LED light will flash every 58 seconds when transmitting.

3. The transmission icon will show briefly when transmitting.

4. You can select a different channel on the sensor if you suspect 

    interference. 

LED

328-2314         www.lacrossetechnology.com/support           Page | 4

F/C for 

Sensor

Channel

Selector

TX button

(Transmission

Channel

Indicator

   

Note: Two hours after initial setup, the temperature/humidity 

               sensor  will search for the Atomic time signal.

 Note: At temperatures below 14°F (-10°C) the sensor display will

            turn off to protect the LCD. Sensor will still transmit data.