Welch Allyn Inc WA11ABG09 Manual De Usuario

Directions for use

5

Setup

Before the radio can be used for the first time, the following tasks must be completed:

1.

Set up the wireless LAN to support the radio including ESSID, authentication, and 
encryption.

2.

Configure the radio for the network using the ESSID, authentication, and encryption 
from the previous step.

3.

Configure Spot Vital Signs LXi.

To complete these tasks, follow the instructions below. 

Setting up the network

To work with the radio, your network must have these features: 

•

A DHCP server.

•

If EAP authentication is enabled: an authentication server (RADIUS).

•

Welch Allyn Connex

®

 software. 

Ensure that your network meets these requirements. 

Configuring the radio for the network

To complete this task, you need the Spot Vital Signs LXi Radio Configuration CD. 

The CD installs a configuration utility and procedure on your computer. 

Refer to the procedure for instructions on how to complete the configuration process.

Configuring Spot Vital Signs LXi

After configuring the radio for the network, you must configure the Spot Vital Signs LXi 
device.

To complete this task, you must change a few settings in the Internal Configuration Mode 
of the device. When changed, these settings become the default power-up settings. 

This task also requires you to connect the radio and barcode scanner to the appropriate 
serial ports on the back of the device. 

1.

Disconnect all devices from Port I and Port II on the back of Spot Vital Signs LXi.

2.

Press 

 to turn off Spot Vital Signs LXi.

3.

Press and hold 

 and 

 simultaneously for 5 seconds. The Configuration Menu 

screen appears.

4.

Use  

to 

choose 

External Devices and press 

 to access the options. 

The External Devices option enables or disables available external devices. 

5.

Use  

to 

choose 

Information System and press 

. Use 

 to select On and 

press .