Genex Telecom Co. Ltd. FRS300 Manual De Usuario
ROGERS LABS, INC.
Genex Electronics
4405 W. 259th Terrace
MODEL: FRS 300
Louisburg, KS 66053
Test #: 010419
Phone/Fax: (913) 837-3214
Test to: FCC Parts 2 and 95
Page 2 of 2
FRS300Manual.doc 05/09/2001
3. Press the SCAN button to deactivate channel scan. The SCAN stops at starting channel when no detection is
made. But the SCAN stops at a different channel when detection is made.
made. But the SCAN stops at a different channel when detection is made.
Battery Level / Low Battery Indication
•
The LCD screen displays the battery level according to the number of squares lit inside the battery symbol.
•
When the battery level is low, the battery icon will flash to indicate that the batteries need to be
replaced.
Sending Call Tones
You can use Call Tones to alert the other user or to identify yourself. You can also use Call Tones to signal the
beginning or the end of a transmission.
1. Press and release the CALL button.
2. Your Call Tones will transmit.
You can use Call Tones to alert the other user or to identify yourself. You can also use Call Tones to signal the
beginning or the end of a transmission.
1. Press and release the CALL button.
2. Your Call Tones will transmit.
Accessory Connection
The model is designed to work with various accessories. When those accessories are connected through the
ACCESSORY CONNECTOR, the headphone symbol will display on LCD indicating this model operating with
accessories.
The model is designed to work with various accessories. When those accessories are connected through the
ACCESSORY CONNECTOR, the headphone symbol will display on LCD indicating this model operating with
accessories.
FCC Information
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS :
(1) THIS DEVICE MAU NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS :
(1) THIS DEVICE MAU NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION.
Safety Information For FRS UNIT
Your wireless handheld portable transceiver contains a low power transmitter. When the PTT button is pushed it
sends out radio frequency (RF) signals. This device is authorized to operate at a duty factor not to exceed 50%. In
August 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels
for hand-held wireless devices.
sends out radio frequency (RF) signals. This device is authorized to operate at a duty factor not to exceed 50%. In
August 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels
for hand-held wireless devices.
Important:
To maintain compliance with the FCC’s RF exposure guidelines, hold the transmitter at least 1 inch
(2.5 centimeters) from your face and speak in a normal voice, with the antenna pointed up and away. If you wear the
handset on your body while using the headset accessory, DO NOT TRANSMIT.
The BM-1010 supplied belt clip is for storage purposes ONLY. Use only the supplied antenna. Unauthorized
antennas, modifications, or attachments could damage the transmitter and may violate FCC regulations.
handset on your body while using the headset accessory, DO NOT TRANSMIT.
The BM-1010 supplied belt clip is for storage purposes ONLY. Use only the supplied antenna. Unauthorized
antennas, modifications, or attachments could damage the transmitter and may violate FCC regulations.
Normal Position:
Hold the transmitter approximately 1” from your face and speak in a normal voice, with the
antenna pointed up and away.