CCP Co. Ltd. 7850-TX27 Manual De Usuario
4
① Chek the power switch
of the back side off.
of the back side off.
②
Release the lock
of the battery cover by
turning as right picture
and remove the battery cover.
turning as right picture
and remove the battery cover.
③
Put the batteries in correct
polarity as per right picture.
polarity as per right picture.
④
Put the battery cover
on and close it by locking
as right picture.
as right picture.
①
Check the power switch of
the controller off.
② Open the battery cover by
pushing the claw of the back side.
pushing the claw of the back side.
③
Put the AA battery in correct
polarity as right picture.
④
Close the battery cover
Gbuggy.indd 4
2011/05/13 11:13:07
How to install the battery in the
controller
controller
* When the batteries are exaust, Power lump (red)
is put out and cannot operate the car.
In this case, please change to new batateries.
is put out and cannot operate the car.
In this case, please change to new batateries.
How to assemble and disassemble the antenna for controller
How to assemble the antenna
Screw the antenna in the
direction of above picture
to pot into controller
correctly.
direction of above picture
to pot into controller
correctly.
How to disassemble the antenna
Screw out the antenna in the
direction of above picture
and remove from the controller
direction of above picture
and remove from the controller
To avoid antenna broken
When shorten the antenna, to shorten step by step
from the under level. Do not shorten by pusing
the top of the antenna.
from the under level. Do not shorten by pusing
the top of the antenna.
How to install the battery
in the car
in the car