Arescom Inc. AG1000PRO Manual De Usuario

The AresGate 1000 offers platform-independent HTML based 
graphical user interface (GUI) configuration, so now you can simply 
set up your router using your PC’s web browser.

Before you start configuring your router, you MUST: 

1. Install the TCP/IP network protocol on your PC, then set its IP 

Address to “Obtain an IP address automatically”. For more 
information on installing and configuring TCP/IP, refer to the 
instructions in the section titled “

”.

2. Configure your wireless device(s) and set the channel number to 

“6” and SSID to “arescom”.

The steps below helps you configure your AresGate router on the 
LAN using the web GUI. 

Launch a web browser from your computer.

Enter the default URL http://192.168.1.1 and press Enter.

The web browser may take a few seconds to log on to your AresGate 
router. As you proceed with the configuration, you will notice that the 
AresGate router’s web GUI is divided into 2 sections:

Allows you to enter values for a basic 
router configuration: 
SETUP
WIRELESS
PPPoE
56K MODEM

For users in need of greater control over 
the AresGate routing capabilities, you 
can access the optional Advanced 
section: 
PORT MAPPNIG
IP ROURING
IP FILTERING
UPGRADE

*

For AresGate 1000 Pro model only