Arescom Inc. AG1000PRO Manual De Usuario

TCP/IP PROTOCOL CONFIGURATION

4.2 Installing TCP/IP in Windows

2000

Step 1.

Click on Start -> Settings -
> Control Panel.

Step 2.

Double-click Network and
Dial-up Connections.

Step 3.

Double-click Local Area
Connection.

Step 4.

In the Local Area
Connection Status
window, click on the
Properties button.

Step 5.

If you see the Internet
Protocol (TCP/IP) listed in
the Local Area
Connection Properties
window, you already have TCP/IP on your Windows 2000. Skip
to Step 10.

Step 6.

From the General tab click Install.

Step 7.

In the Select Network Component Type window, select
Protocol and click Add.

Step 8.

Choose Internet Protocol (TCP/IP) from the Network Protocol
list box, then click OK.

Step 9.

Check to see if
Internet Protocol
(TCP/IP) is listed in
the Local Area
Connection
Properties window. If
you do not see
Internet Protocol
(TCP/IP) listed, then
you have not
installed the
protocol. Repeat
steps 6 - 8.

Step 10. From the General tab in the Local Area Connection Properties

window, select Internet Protocol (TCP/IP) and click
Properties.