Arescom Inc. AG2000S Manual De Usuario
AG2000Series Software User’s Guide
June, 2002
15
Basic - WIRELESS
Wireless Channel Number
A wireless channel is a specific frequency band at which the AG2000 communicates with a client. You
can select one of the 11 channels from the dropdown menu for the AG2000 to use. However, if you
enable the Auto-Channeling feature below, the channel you selected here will be ignored by the sys-
tem. Instead, it will be replaced by the channel number that the system selected. The default channel
number is 6.
can select one of the 11 channels from the dropdown menu for the AG2000 to use. However, if you
enable the Auto-Channeling feature below, the channel you selected here will be ignored by the sys-
tem. Instead, it will be replaced by the channel number that the system selected. The default channel
number is 6.
Auto-Channeling
When you turn on the auto-channeling feature, the AG2000 automatically scans the surrounding radio
signals, selects the least interference and lowest traffic channel to use, and displays this selected chan-
nel in the above Wireless Channel Number. The default setting of this feature is Off.
signals, selects the least interference and lowest traffic channel to use, and displays this selected chan-
nel in the above Wireless Channel Number. The default setting of this feature is Off.
NOTE: Turning on the Auto-Channeling feature may cut off the wireless connection between the AG2000 and
your PC. Click Re-Scan in the Wireless Configuration Utility program installed in your PC to re-estab-
lish the wireless connection.
lish the wireless connection.
WEP (Wired Equivalent Privacy)
The Wired Equivalent Privacy (WEP) is used to protect wireless communication from eavesdropping.
Since WEP uses a secret key shared between communicators, if you enable the WEP feature, entering
the WEP key values below is required.
Since WEP uses a secret key shared between communicators, if you enable the WEP feature, entering
the WEP key values below is required.
Default WEP Key
The AG2000 supports 40-bit and 128-bit WEP keys. For 40-bit WEP encryption, you need to enter 10
hexadecimal digits in one of the key fields below. For 128-bit WEP encryption, you need to enter 26
hexadecimal digits in one of the key fields below. Although there are four key fields you can set up for
the AG2000, you can choose only one at a time from the Default WEP Key dropdown menu. The WEP
key is not case-sensitive. The default key field is 1.
hexadecimal digits in one of the key fields below. For 128-bit WEP encryption, you need to enter 26
hexadecimal digits in one of the key fields below. Although there are four key fields you can set up for
the AG2000, you can choose only one at a time from the Default WEP Key dropdown menu. The WEP
key is not case-sensitive. The default key field is 1.
1.
Enter either 40-bit WEP keys as 10 HEX digits or 128-bit WEP keys as 26 Hex digits
here.
here.
2. Enter either 40-bit WEP keys as 10 HEX digits or 128-bit WEP keys as 26 Hex digits
here.
3. Enter either 40-bit WEP keys as 10 HEX digits or 128-bit WEP keys as 26 Hex digits
here.
4. Enter either 40-bit WEP keys as 10 HEX digits or 128-bit WEP keys as 26 Hex digits
here.
Click Save to save the values to your AG2000. If you do not wish to send the configuration to your
AG2000, simply click Cancel.
AG2000, simply click Cancel.