Arescom Inc. AG2000S Manual De Usuario
Minimum System Requirements
2
June, 2002
AG2000Series Software User’s Guide
1.4 Minimum System Requirements
•
Cable or ADSL line.
•
Microsoft Windows 98 or later version.
•
166 MHz Pentium or equivalent processor.
•
16 MB RAM or more.
•
170 MB available free hard disk space before installation.
•
Available 10BaseT Ethernet on the main computer
•
CD-ROM Drive
1.5 Network Scenario
1.5.1 Installing a Single AG2000
Figure 1.1
Installing a Single AG2000 Network Scenario
The AG2000 provides a connection point to the wireless clients and the wired LAN (See figure above).
It works with your existing Internet access equipment (such as a DSL modem or Cable modem) to pro-
vide a gateway to the Internet for your entire network.
It works with your existing Internet access equipment (such as a DSL modem or Cable modem) to pro-
vide a gateway to the Internet for your entire network.
Wireless LAN Network
You can easily create a wireless network using your AG2000. The PCs, PDAs or other electronic appli-
ances on your wireless network must have 802.11b-compliant wireless devices already installed in
them. The AG2000 is compatible with any wireless device that is certified by Wi-Fi. To be able to com-
municate with the AG2000 wireless network successfully, they all need to share the same SSID, chan-
nel number and operating mode (infrastructure) as the AG2000. Please refer to Chapter 4 for more
detailed configurations of the AG2000.
ances on your wireless network must have 802.11b-compliant wireless devices already installed in
them. The AG2000 is compatible with any wireless device that is certified by Wi-Fi. To be able to com-
municate with the AG2000 wireless network successfully, they all need to share the same SSID, chan-
nel number and operating mode (infrastructure) as the AG2000. Please refer to Chapter 4 for more
detailed configurations of the AG2000.
Wired LAN Network
The AG2000 can also connect to the wired LAN through the connection from the Ethernet 10/
100BaseT LAN ports on back of the unit. Use a straight-through Ethernet cable to connect the AG2000
to PCs on the LAN network. If you have more than 4 desktop computers in your wired LAN and want
to connect to the AG2000, an extra hub or switch is required to be installed.
100BaseT LAN ports on back of the unit. Use a straight-through Ethernet cable to connect the AG2000
to PCs on the LAN network. If you have more than 4 desktop computers in your wired LAN and want
to connect to the AG2000, an extra hub or switch is required to be installed.