Wistron Corporation 2008MMAPER6 Manual De Usuario

Use the Power button [16] to turn on or off the MobileMapper 
6. In both cases, a short press is enough to turn on or off the 
receiver.

Rather than actually turning off the MobileMapper 6, the 
Power button in fact puts the receiver in suspend mode. This 
means that when you next turn it on, the receiver will restore 
the context in which it was when you last turned it off.

Only complete removal of the internal battery, disconnection 
of the external AC adapter or a reset action will actually shut 
down the receiver. 

Gives access to a slot [17]* where you can insert or extract an 
SD card. 

A 1/4-inch jack (TRS connector) [18]* used to connect an 
earphone to the MobileMapper 6. 

This is a powerful white flashlight [19] that can 
advantageously be used in dim light conditions. Using 
MobileMapper 6 as a flashlight may however be incompatible 
with GPS reception, i.e. in the way you hold the receiver. 

Press the Reset button [20] using the stylus when you need 
to perform a software reset. This will re-boot the Windows 
Mobile Operating System. 

Items [14], [15], [17] and [18] presented above are all 
marked with a “*” symbol indicating that a black rubber flap 
is used to protect each of them.

To access one of these items, just insert a nail underneath the 
flap and pull it open.

[16]

[17]

[18]

[20]

[19]